Serving the Wilmington area  ·  (910) 218-9134  ·  Open Mon-Sun 7am-7pm
📞 (910) 218-9134 Free Quote

Metal Roofing in Wilmington, NC (28403) · Local Professionals

Wilmington Metal Roofing · Fast response in Wilmington and the Wilmington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Wilmington's historic downtown blocks, with their Victorian and Queen Anne homes under live oaks, sit just a few miles from the newer coastal subdivisions out toward Wrightsville Beach. The salt air, hurricane-season wind, and humid summers here wear roofs down faster than most homeowners expect.

We're Wilmington Metal Roofing, and we've built our reputation on helping homeowners in ZIP 28403 and across New Hanover County protect their properties with metal roofing that stands up to coastal weather. Whether you're in a Carolina Heights bungalow or a Porters Neck two-story, we know the local challenges because we live and work here too.

Metal Roofing in Wilmington (28403)

Wilmington's terrain is flat coastal plain with sandy soil, tidal creeks, and salt marsh never far away. That means drainage matters as much as the roof itself, and we pay close attention to how water sheds off your property. The housing stock varies widely: steep-gabled Victorians downtown, low-pitched brick ranches in Forest Hills and Masonboro, and elevated beach cottages toward Kure Beach. Each type has its own challenges, from tight lot access in historic blocks to HOA design rules in newer subdivisions. Salt air corrodes cheap fasteners quickly, so we use corrosion-resistant materials and proper flashing details. Live oaks and pines drop limbs and debris that can puncture panels or clog gutters, and shaded roofs often grow algae and mildew streaks. We've seen it all and know how to spec a metal roof that lasts in this climate.

Our team has installed, repaired, and replaced metal roofs across Wilmington and the surrounding areas, from the historic district to Leland and Hampstead. We understand the local building department requirements and can help you navigate permits and inspections. For official city information, you can visit the City of Wilmington website.

Our services in Wilmington

How a Job Works in Wilmington

Step 1: You call us at (910) 218-9134 or request a free estimate online. We schedule an on-site assessment at your convenience, inspect your existing roof, discuss your options, and provide a written estimate. We'll also review any HOA or historic district requirements that might affect your project.

Step 2: Once you approve the estimate, we handle the permitting and scheduling. Our insured crews arrive on time, protect your landscaping, and work efficiently. On tight lots in older neighborhoods, we plan material delivery and staging carefully to avoid disrupting neighbors. We keep you informed throughout the installation, especially if weather delays occur during hurricane season.

Step 3: After the work is complete, we do a thorough cleanup, haul away all debris, and walk the property with you to ensure everything meets your expectations. We don't consider a job done until you're satisfied.

Metal roofing costs in Wilmington vary based on the material, roof complexity, and access. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10, metal roof replacement from $9, and retrofitting over existing shingles from $7. Repairs typically start at $450, and screw replacement or re-fastening starts at $750. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Factors like roof pitch, number of stories, and urgency can affect the final price. We provide free estimates so you know exactly what to expect. Call (910) 218-9134 to schedule yours.

My Carolina Heights bungalow has a low-pitched roof and live oak branches hanging over it. What metal roofing options work best for that shade and debris?
Low-pitched roofs in shady neighborhoods like Carolina Heights often need a standing seam or corrugated panel with a raised profile to shed debris and resist algae. We recommend a Kynar 500 finish for fade and chalk resistance, and we'll trim back overhanging limbs where possible. Proper ventilation is also key to prevent condensation in humid conditions.
A storm just blew some panels loose on my roof near Wrightsville Beach. How quickly can you respond for emergency repairs?
We prioritize storm damage calls, especially after hurricanes or nor'easters. Call us at (910) 218-9134 and we'll schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the area to prevent further water intrusion while we prepare a permanent repair plan.
What's the typical cost to replace a shingle roof with metal on a 1,500-square-foot ranch in Forest Hills?
For a 1,500-square-foot ranch with a low-slope roof, a basic corrugated or ribbed panel system might start around $5.50 per square foot installed, while standing seam could run $10 or more per square foot. Removal of old shingles, decking repairs, and flashing details can add to the cost. We'll give you a precise quote after inspecting your roof.
Do I need a permit to install a metal roof in Wilmington, and how does the historic district affect the process?
Yes, roofing permits are generally required for replacements and some repairs. In historic districts, additional design review may be needed for panel profile and color. We handle permit applications and can guide you through the process. For specific requirements, check with the City of Wilmington's building department or visit their website.
My HOA requires a specific roof color, and my neighbor's tree branches cross the property line. How do you handle those issues?
We're experienced with HOA approvals and can provide color samples and documentation to submit for approval. For property line issues, we recommend discussing with your neighbor before trimming branches. We can work with you to ensure the installation respects property boundaries and doesn't encroach on neighboring lots.
Are you fully insured for roofing work in Wilmington, and what does that cover?
Yes, we carry general liability insurance and workers' compensation coverage. This protects you and your property in case of accidents or damage during the project.
What maintenance should I do to keep my metal roof in good shape through Wilmington's humid summers and hurricane season?
We recommend annual inspections, especially before hurricane season. Check for loose fasteners, debris buildup in valleys and gutters, and any signs of corrosion. After storms, look for lifted panels or dents. We offer maintenance plans and can perform inspections to catch small issues before they become costly repairs.
Why choose us?

Trusted professionals in Wilmington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wilmington

All your work handled by qualified professionals in Wilmington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Wilmington

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wilmington · Response within 24h · No commitment · ☎ (910) 218-9134

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wilmington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm