Serving the Wilmington area  ·  (910) 218-9134  ·  Open Mon-Sun 7am-7pm
📞 (910) 218-9134 Free Quote

Metal Roofing in Hampstead, NC (28411) · Local Professionals

Wilmington Metal Roofing · Fast response in Hampstead and the Wilmington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Hampstead sits right where Pender County meets the coast, and its mix of wooded subdivisions and farm lots means roofs here take a beating from pine limbs, summer storms, and salt air. If you live off Country Club Road or near the Hampstead Kiwanis Park, you already know that a cheap shingle roof just doesn't hold up the way it used to.

That's why homeowners in ZIP 28411 call Wilmington Metal Roofing. We're based in Wilmington, just a short drive up Highway 17, and we've installed and repaired metal roofs all over Hampstead, from the older homes near the Intracoastal to the newer builds off Sloop Point Road. We know the local building department, the HOA quirks, and the way wind funnels through these wooded lots.

Metal Roofing in Hampstead (28411)

Hampstead is a mix of larger farm lots and tighter subdivision streets, and that shapes how we approach every job. On the farm properties, we're often dealing with long runs of roof, outbuildings, and barns that need standing seam or corrugated panels to handle wind and rain. In the subdivisions, lots are smaller, driveways are tighter, and we have to plan material staging carefully so we don't block neighbors or tear up lawns. The sandy soil and flat terrain mean drainage matters, and we always check that gutters and downspouts are sized right for the roof area. Many homes here are surrounded by tall pines and live oaks, so falling limbs and pine straw buildup are real concerns. We often recommend screw replacement and re-fastening on older metal roofs because the original fasteners can back out or corrode in this coastal air.

Our team has worked on everything from 1980s two-story subdivision homes to newer custom builds with complex rooflines. We understand how salt air and hurricane-season wind affect different panel profiles and finishes, and we'll tell you honestly what will last and what won't. We're fully insured with general liability and workers' compensation, so you're covered if anything happens on your property.

Our services in Hampstead

How a Job Works in Hampstead

Step 1: You call us at (910) 218-9134 or request a free estimate online. We'll set up a time to come out and inspect your roof, whether it's a simple leak repair or a full replacement. We'll look at the decking, flashing, fasteners, and drainage, and we'll talk through options like standing seam, stone-coated steel, or a retrofit over existing shingles. You'll get a written estimate with clear pricing, no surprises.

Step 2: Once you approve, we schedule the work. In Hampstead, that often means coordinating with the Pender County building department for permits, and if you're in an HOA, we'll help you get the design approval for panel profile and color. On tight subdivision lots, we plan deliveries and staging to keep access clear. Our crew protects your landscaping and works efficiently to minimize disruption.

Step 3: When the job is done, we do a thorough cleanup, including magnet sweeps for nails and debris. We walk the roof with you, show you the finished work, and make sure you're satisfied. We leave your property clean and tidy, just like we found it (or better).

Pricing for metal roofing in Hampstead depends on the job, but here are some realistic ballpark figures. Metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over shingles at $7. Corrugated panel roofing starts at $5.50, while copper and specialty metals start at $20. For repairs, metal roof leak repair starts at $450, screw replacement at $750, and flashing or chimney repair at $600. Coating and painting starts at $2.50 per square foot, and gutters start at $9 per linear foot. The final cost depends on roof size, pitch, access, condition of the existing roof, and how urgent the work is. We give free estimates, so call (910) 218-9134 and we'll come take a look.

My Hampstead home is surrounded by tall pines. Will a metal roof handle falling limbs better than shingles?
Yes, generally. Metal roofs are more impact-resistant than asphalt shingles, and if a limb does hit, it's often a dent rather than a puncture. Standing seam and stone-coated steel are good choices for wooded lots. We can also inspect your roof after storms and repair any damage.
A storm just blew through Hampstead and I think my metal roof has lifted panels. What should I do?
Call us right away at (910) 218-9134. We offer free inspections for storm and wind damage. We'll secure the roof, document the damage for your insurance claim, and give you a repair estimate. Don't wait, because small lifts can turn into big leaks.
How much does a metal roof replacement cost for a typical Hampstead subdivision home?
Most homes in Hampstead are around 1,500 to 2,500 square feet of roof area, so a replacement with corrugated or ribbed panels might start around $8,000 to $15,000, while standing seam could run $15,000 to $25,000. These are ballpark numbers. We give free estimates after inspecting your roof.
Do I need a permit for a metal roof in Hampstead, and does the HOA have a say?
Yes, Pender County generally requires a permit for a full re-roof, and fees and inspections vary. If you're in an HOA, they may have design rules about panel style and color. We help you navigate both, but always confirm with the local building department and your HOA before work starts.
My neighbor's tree drops limbs on my roof. What are my rights, and will my HOA get involved?
In North Carolina, you generally have the right to trim branches that overhang your property line, but you can't force a neighbor to remove a tree unless it's a hazard. If you're in an HOA, check the covenants about landscaping and tree maintenance. We can repair any damage and provide documentation for insurance or HOA disputes.
Are you fully insured for work on my Hampstead property?
Yes, we carry general liability and workers' compensation insurance. That protects you if anyone gets hurt or if there's accidental damage.
What maintenance does a metal roof need in Hampstead's climate?
Keep gutters and valleys clear of pine straw and leaves, especially after storms. Check fasteners annually for corrosion or backing out, and touch up scratches. We offer inspections and maintenance plans. Call (910) 218-9134 to schedule.
Why choose us?

Trusted professionals in Wilmington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wilmington

All your work handled by qualified professionals in Wilmington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Wilmington

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wilmington · Response within 24h · No commitment · ☎ (910) 218-9134

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wilmington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm