Serving the Wilmington area  ·  (910) 218-9134  ·  Open Mon-Sun 7am-7pm
📞 (910) 218-9134 Free Quote

Metal Roofing in Southport, NC (28461) · Local Professionals

Wilmington Metal Roofing · Fast response in Southport and the Wilmington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Southport's historic cottages and waterfront homes sit right on the Cape Fear River, where salt air and nor'easters put every roof to the test. If you live near the Southport waterfront or off Howe Street, you already know that cheap fasteners and thin panels don't last long here.

Homeowners in 28461 call Wilmington Metal Roofing because we understand coastal roofs, from the steep gables near the Southport Marina to the low-slope cottages under the live oaks. We install, repair, and replace metal roofs built for salt air and hurricane season.

Metal Roofing in Southport (28461)

Southport is a small city with big coastal challenges. The historic district has 19th-century cottages and Victorian homes with steep pitches and tight lots, often shaded by live oaks and magnolias. Down by the river and near the Southport Yacht Basin, salt spray corrodes fasteners and flashing faster than inland. Sandy soil and tidal creeks mean drainage matters, and afternoon thunderstorms bring wind-driven rain that finds every gap. We see a lot of failed fasteners, separated seams, and flashing leaks on older roofs, plus wind-lifted panels after tropical systems.

Our team has worked across Brunswick County and the Wilmington area for years. We know how to handle the tight access on streets like West Street and the historic review that comes with older homes. Whether it's a standing seam roof on a waterfront cottage or a metal retrofit over shingles on a ranch near Smithville Park, we match the system to the house and the exposure.

Our services in Southport

How a Job Works in Southport

Step 1: You call (910) 218-9134 or request a free estimate online. We schedule an on-site assessment, inspect your roof and attic, check flashing and fasteners, and talk through options and budget. For storm damage, we document everything for your insurance claim.

Step 2: Once you approve the scope, we pull the required permits from the City of Southport building department and coordinate any historic district or HOA review. On tight lots near the waterfront, we plan material staging carefully. Our crew removes the old roof, installs new underlayment and flashing, and sets your metal panels or shingles with corrosion-resistant fasteners.

Step 3: We clean up daily and do a final walkthrough with you. We haul away all debris, use a magnet to catch stray screws, and make sure you know how to care for your new roof. We leave your property clean and your roof ready for the next storm season.

Pricing in Southport depends on roof size, pitch, access, and condition. As a ballpark, corrugated panel roofing starts around $5.50 per square foot, standing seam around $10, and metal shingles or stone-coated steel around $9. A metal roof over existing shingles starts near $7 per square foot. Repairs like leak fixes start around $450, and screw replacement or re-fastening starts around $750. Coating and painting starts around $2.50 per square foot. For a free estimate on your Southport home, call (910) 218-9134. We'll give you a clear, written price with no surprises.

Do you work on historic homes in Southport's historic district?
Yes. We regularly work on older cottages and Victorian homes near the waterfront. We understand that historic review may restrict panel profiles and colors, and we help you choose a metal roof that meets those rules while standing up to salt air.
How fast can you respond to storm damage in Southport?
We prioritize active leaks and storm damage. Call (910) 218-9134 and we'll schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We document damage for insurance and make temporary repairs if needed.
What does a metal roof cost for a typical Southport cottage?
Most Southport cottages fall in the $8 to $12 per square foot range for installation, depending on size, pitch, and material. A 1,500 square foot roof might run $12,000 to $18,000. We provide a free written estimate after inspecting your roof.
Do I need a permit for a metal roof in Southport?
Yes, a roofing permit is typically required for replacement or re-roof. The City of Southport building department sets the rules, and historic district review may also apply. We handle the permit process for you and schedule inspections.
What if my HOA or neighbor has concerns about my new roof?
We help you navigate HOA design review by providing product specs and color samples. For property line concerns, we follow local setback rules and can adjust flashing and drainage to keep water off your neighbor's property.
Are you insured for work on my Southport property?
Yes, we are fully insured with general liability and workers' compensation coverage.
How often should I have my metal roof inspected in Southport?
Because of salt air and storm season, we recommend an inspection every two to three years, and after any major storm. Check fasteners, flashing, and seams. A quick inspection can catch corrosion or loose screws before they become leaks.
Why choose us?

Trusted professionals in Wilmington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wilmington

All your work handled by qualified professionals in Wilmington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Wilmington

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wilmington · Response within 24h · No commitment · ☎ (910) 218-9134

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wilmington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm