Serving the Wilmington area  ·  (910) 218-9134  ·  Open Mon-Sun 7am-7pm
📞 (910) 218-9134 Free Quote

Metal Roofing in Leland, NC (28451) · Local Professionals

Wilmington Metal Roofing · Fast response in Leland and the Wilmington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Leland is growing fast along the Cape Fear River, with new subdivisions popping up off Village Road and Old Fayetteville Road almost every month. The mix here is wide: two-story brick-and-siding homes in neighborhoods like Brunswick Forest and Waterford, older ranches with low-pitched shingle roofs closer to downtown Leland, and a few farmhouses and barns out toward the county line. Lots are often tight, and the sandy soil near tidal creeks means drainage and roof runoff matter as much as the panels themselves.

Homeowners in 28451 call Wilmington Metal Roofing because we know how salt air and hurricane-season wind treat cheap fasteners and thin panels. We have replaced plenty of roofs in Leland where the shingles were fine but the screws had corroded through. Whether you are near the Leland Municipal Park or off US-17, we can give you a straight answer on what your roof needs.

Metal Roofing in Leland (28451)

Leland sits on flat coastal plain with sandy soil, and many neighborhoods were built on former pine forest. That means two things for roofing: first, tree debris and shade are constant, so algae and mildew streaks show up fast on north-facing slopes; second, when a storm drops two inches in an hour, water sheets off roofs and needs somewhere to go. We see a lot of homes in Leland where gutters are undersized or downspouts dump right at the foundation. Metal roofing helps because it sheds water faster than shingles, but only if the flashing and gutter system are sized right. Tight lots in subdivisions like Magnolia Greens or Compass Pointe also mean we often have to stage materials in the driveway and carry panels by hand, which adds time but not surprises. And on the newer two-story homes, we frequently find that the original builder-grade fasteners are already backing out or rusting after 10 to 15 years, especially on roofs with southern exposure.

Our team has worked roofs from Leland to Carolina Beach and up through Pender County. We know which local inspectors want to see ice and water shield at the eaves, and we know how to document storm damage for insurance without promising anything the adjuster won't approve.

Our services in Leland

How a Job Works in Leland

Step 1: You call (910) 218-9134 or request a free estimate online. We schedule a time to walk your roof and attic, check fasteners, flashing, and decking, and take photos. If you are in a neighborhood with an HOA, we will ask for the architectural guidelines up front so we can flag any color or profile restrictions before you pick a panel.

Step 2: Once you approve the scope and price, we pull the permit from the Town of Leland (or the county, depending on your address) and schedule the work. On tight lots, we plan deliveries for early morning and use panel lifts where possible. If your home is in a historic district or has a steep gable like some of the older houses closer to the river, we take extra care with staging and fall protection. Most residential re-roofs take two to four days, weather permitting.

Step 3: We clean the yard with a magnet sweep for nails, haul away old materials, and walk the roof with you to show you the finished seams, flashing, and fasteners. We do not leave until you have seen the work and signed off.

Pricing in Leland depends on roof size, pitch, access, and how much decking needs repair. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. A metal roof over existing shingles (retrofit) starts at $7 per square foot, and full replacement starts at $9 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, or skylight repair starts at $600. Gutters for metal roofs start at $9 per linear foot. We give free estimates and free inspections, and we will tell you honestly if a repair makes more sense than a replacement. Call (910) 218-9134 to set one up.

My house in Brunswick Forest has an HOA. Can I still get a standing seam metal roof?
Usually yes, but the HOA architectural review board will want to see the panel profile, color sample, and sometimes the fastener type before you install. We can provide manufacturer spec sheets and color chips to include with your application. Some Leland HOAs restrict certain bright colors or require a matte finish, so it is worth checking before you order materials.
A storm just peeled back part of my metal roof near Waterford. How fast can you get out?
We treat wind-lifted panels and active leaks as priority calls. Call (910) 218-9134 and we will schedule an inspection as soon as possible, often same or next day depending on storm volume. We can tarp or secure the area to prevent further water intrusion, then document the damage with photos for your insurance claim.
What does a typical metal roof repair cost in Leland?
Most repairs start at $450 for leak diagnosis and fixing failed flashing or fasteners. Screw replacement and re-fastening across a larger area starts at $750. The final price depends on roof access, how many fasteners are bad, and whether the leak has damaged decking or insulation. We give you a written estimate before any work begins.
Do I need a permit to replace my roof in Leland?
Yes, the Town of Leland generally requires a roofing permit for a full replacement or re-roof, and the rules can vary depending on whether you are in the town limits or unincorporated Brunswick County. We handle the permit application and coordinate inspections. Always check with the local building department for the current requirements, since thresholds and fees can change.
My neighbor's tree branches hang over my roof. Who is responsible if they damage my metal roof?
In North Carolina, you generally have the right to trim branches that cross your property line, but you cannot force a neighbor to remove a healthy tree. If a limb falls and damages your roof, your own insurance typically handles the claim, though you may have a separate civil issue with the neighbor. We can document the damage and provide a repair estimate for your insurer. For HOA disputes, review your covenants or ask the board to mediate.
Are you fully insured for work at my Leland home?
Yes. We carry general liability insurance and workers' compensation coverage.
What should I do to maintain my metal roof in Leland between storms?
Check your gutters twice a year, especially after pine pollen season in spring and after hurricane season in fall. Look for backed-out screws or rust streaks at fasteners, and keep tree limbs trimmed back at least six feet from the roof. Because Leland stays humid and shady, algae can grow on north slopes, but a light wash with a manufacturer-approved cleaner once a year keeps it under control. We offer free inspections if you want a professional eye on it.
Why choose us?

Trusted professionals in Wilmington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wilmington

All your work handled by qualified professionals in Wilmington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Wilmington

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wilmington · Response within 24h · No commitment · ☎ (910) 218-9134

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wilmington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm