Serving the Wilmington area  ·  (910) 218-9134  ·  Open Mon-Sun 7am-7pm
📞 (910) 218-9134 Free Quote

Metal Roofing in Carolina Beach, NC (28428) · Local Professionals

Wilmington Metal Roofing · Fast response in Carolina Beach and the Wilmington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Carolina Beach is a barrier island town where salt air eats fasteners and nor'easters peel panels off elevated cottages. The housing stock runs from classic 1950s fishing cottages on Freeman Park to newer three-story beach houses on Canal Drive, all packed onto narrow lots with live oaks and palmettos.

Homeowners in 28428 call Wilmington Metal Roofing because we understand island roofing: standing seam that locks out salt-driven rain, storm damage repair after a blow, and the corrosion issues that come with living a block from the Atlantic. We're based in Wilmington and know every street from the Boardwalk to the Carolina Beach State Park.

Metal Roofing in Carolina Beach (28428)

Carolina Beach properties sit on sandy soil with a high water table, and many lots are tight with narrow setbacks, especially in the older cottage blocks near the Boardwalk and along Carolina Beach Avenue. That means staging materials and equipment takes planning, and we often work from the street or use compact lifts. The salt air is relentless: cheap fasteners and cut edges rust through in a few seasons, so we specify stainless or coated fasteners and seal every cut. Wind uplift is the other big factor. Elevated homes on pilings catch more wind, and after a tropical system we see lifted panels, failed seams, and flashing gaps. We also deal with algae and mildew streaks on shaded north slopes, and occasional hail that dents softer metal. Our team has been roofing in New Hanover County for years, and we've worked on everything from historic cottages near the lake to new construction on the north end.

Our experience serving Carolina Beach and the Wilmington area means we know the local building department, the inspection timing, and what holds up in this climate.

Our services in Carolina Beach

How a Job Works in Carolina Beach

Step 1: Call us at (910) 218-9134 or request a free estimate online. We'll schedule a time to meet you at the property, inspect the roof and attic, and talk through options. You'll get a written scope and price before any work starts.

Step 2: Once you approve, we pull the required permits from the town of Carolina Beach and coordinate with any HOA design review. On installation day, we protect landscaping, set up safe access (which often means working around tight driveways and neighboring properties), and keep the site organized. For storm damage, we document everything for your insurance claim and tarp if needed.

Step 3: After the work is done, we clean the site thoroughly, including magnet sweeps for nails, and walk the roof with you to make sure you're satisfied. We leave your property clean and your roof watertight.

Pricing in Carolina Beach depends on roof size, pitch, access, and the condition of the existing roof. For a typical 1,800-square-foot home, metal roof installation starts around $8 per square foot, standing seam from $10, and replacement from $9. If you're going over existing shingles, retrofit starts at $7 per square foot. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. Storm and wind damage inspections are free. We give you a clear, written estimate with no surprises, and we're happy to walk you through the numbers. Call (910) 218-9134 for a free estimate.

My Carolina Beach cottage is a block from the ocean, and the salt air has rusted the fasteners on my current metal roof. Can you replace just the screws and washers, or do I need a whole new roof?
We see this a lot on the island. If the panels themselves are still sound and only the fasteners are corroded, we can often replace the screws with marine-grade stainless steel fasteners and washers, which is much less expensive than a full replacement. We'll inspect the panels for corrosion and seam integrity before recommending a repair. Call us at (910) 218-9134 to schedule a free inspection.
A nor'easter just peeled back some panels on my roof near the Carolina Beach Boardwalk. How quickly can you respond for storm damage?
We prioritize storm damage calls in Carolina Beach and the surrounding area. We can typically get out within 24 to 48 hours for an inspection and temporary tarping if needed. Call (910) 218-9134 and we'll schedule a free inspection and provide a written estimate for permanent repairs.
What's the typical cost to replace a metal roof on a 1,500-square-foot beach house in Carolina Beach?
For a 1,500-square-foot home, metal roof replacement typically starts around $9 per square foot, so you're looking at roughly $13,500 and up, depending on pitch, access, and whether we're removing the old roof. Standing seam runs a bit more, starting around $10 per square foot. We provide free estimates and detailed pricing after inspecting your roof.
Do I need a permit to install a metal roof in Carolina Beach, and does the town have any special requirements for beachfront properties?
Yes, the town of Carolina Beach requires a roofing permit for replacements and some repairs. There may be additional requirements for homes in the historic district or near the oceanfront, such as wind uplift ratings and design review. We handle the permit application and inspections for you, and we'll make sure the work meets all local codes.
My HOA requires a specific roof color and profile. Can you help with the approval process?
Absolutely. We work with HOAs in Carolina Beach regularly and can provide product specifications, color samples, and installation details for the architectural review. We'll coordinate with your HOA to ensure the metal roof meets their guidelines before we order materials.
Are you fully insured for roofing work in Carolina Beach?
Yes, Wilmington Metal Roofing is fully insured with general liability and workers' compensation coverage. You can call us at (910) 218-9134 for details.
What maintenance does a metal roof need in Carolina Beach's salt air environment?
We recommend an annual inspection to check for loose fasteners, corrosion, and debris buildup, especially after hurricane season. Washing the roof periodically to remove salt and dirt helps extend its life. We offer maintenance plans and can inspect your roof for free. Call (910) 218-9134 to schedule.
Why choose us?

Trusted professionals in Wilmington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wilmington

All your work handled by qualified professionals in Wilmington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Wilmington

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wilmington · Response within 24h · No commitment · ☎ (910) 218-9134

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wilmington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm