Serving the Wilmington area  ·  (910) 218-9134  ·  Open Mon-Sun 7am-7pm
📞 (910) 218-9134 Free Quote

Metal Roofing in Holden Beach, NC (28470) · Local Professionals

Wilmington Metal Roofing · Fast response in Holden Beach and the Wilmington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (910) 218-9134
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Holden Beach is a barrier island town where raised beach houses on stilts face the Atlantic and the Intracoastal Waterway, and the salt air hits every roof on the island. The housing stock here is mostly elevated coastal cottages and vacation rentals, many built in the 1980s through 2020s, with a mix of older fishing cottages and newer custom homes along Ocean Boulevard and Holden Beach Road.

Homeowners and property managers in ZIP 28470 call Wilmington Metal Roofing because we understand how salt air corrodes cheap fasteners and how hurricane-season wind peels back panels that were not installed for coastal conditions. We are based in Wilmington and serve Holden Beach and the surrounding areas, and we know the local building department and HOA requirements that come with roofing on the island.

Metal Roofing in Holden Beach (28470)

Holden Beach sits on a narrow barrier island with sandy soil and tidal creeks, and the lots are tight. Many homes are raised on pilings, which means roof access requires staging and fall protection that meets code, and the wind zone here is among the highest in the state. The salt air is relentless: it attacks fasteners, flashing, and any cut edge that is not properly protected. We see failed screws and corroded panels on older roofs, and we spec coastal-grade fasteners and materials that hold up to the environment. Stone-coated steel and standing seam are common choices here because they handle wind uplift and salt air better than asphalt shingles, and they are often required by insurance carriers for coastal properties.

Our team has worked on elevated beach houses, vacation rentals, and permanent residences throughout Holden Beach and the surrounding Brunswick County communities. We know the permit process through the local building department and can coordinate with HOA design review when a roof color or profile needs approval.

Our services in Holden Beach

How a Job Works in Holden Beach

Step 1: Call us at (910) 218-9134 or request a free estimate online. We schedule an on-site assessment at your Holden Beach property, inspect the existing roof and attic space if accessible, and discuss your options, whether that is a repair, a replacement, or a retrofit over existing shingles. We provide a written estimate with clear pricing and no pressure.

Step 2: Once you approve, we pull the required permits through the local building department and schedule the work. On the island, we plan for tight lot access, parking for our crew and materials, and coordination with any HOA or property manager. We protect your landscaping and decking, and we keep the site secure each day, especially on rental properties where turnover schedules matter.

Step 3: After installation, we clean the site thoroughly, including magnet sweeps for nails and debris, and we walk the finished roof with you. We provide documentation for your insurance company if needed, and we leave your property clean and ready for the next rental or season.

Pricing for metal roofing in Holden Beach depends on the size and complexity of your roof, access, the condition of the existing roof, and the material you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, metal roof replacement at $9 per square foot, and a retrofit over existing shingles at $7 per square foot. Repairs start at $450, and screw replacement and re-fastening start at $750. Stone-coated steel and metal shingle roofing start at $9 per square foot, and copper or specialty metal starts at $20 per square foot. We offer free estimates and inspections, so call (910) 218-9134 to get a precise quote for your Holden Beach home.

My Holden Beach house is raised on pilings. Does that affect roof installation or repair?
Yes, it does. Raised beach houses require careful staging and fall protection, and we often need to work from ladders or scaffolding that can be set on stable ground. We also check the connection between the roof and the structure, since wind uplift is a major concern on elevated homes. Our team is experienced with piling foundations and can recommend fastening methods that meet local wind requirements.
How quickly can you respond to storm damage or an active leak in Holden Beach?
We prioritize emergency calls for active leaks and storm damage in Holden Beach and the surrounding areas. Call us at (910) 218-9134, and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand after a storm. We can provide temporary leak mitigation and then a permanent repair plan.
What is the typical cost for a metal roof repair in Holden Beach?
Most metal roof repairs in Holden Beach start around $450, which covers common issues like flashing repairs, sealant replacement, or small panel fixes. Larger repairs, such as screw replacement or re-fastening, start at $750. The final cost depends on the extent of damage, roof access, and material. We provide a free estimate before any work begins.
Do I need a permit for a metal roof replacement in Holden Beach?
Yes, a roofing permit is commonly required for a full replacement or re-roof in Holden Beach. The local building department sets the thresholds, fees, and inspection requirements, and they vary by jurisdiction. We handle the permit application and inspections as part of our service, and we always defer to the local building department for the final rules.
My HOA requires a specific roof color. Can you help with approval?
Yes, we can coordinate with your HOA design review. Many Holden Beach communities have architectural guidelines for roof color and profile, especially for standing seam and stone-coated steel. We can provide product samples and documentation to submit for approval, and we schedule work only after you have the necessary approvals.
Are you fully insured for work on Holden Beach properties?
Yes, Wilmington Metal Roofing is fully insured, carrying both general liability and workers' compensation coverage. This protects you and your property throughout the project.
How often should I have my metal roof inspected in Holden Beach?
We recommend an inspection every two to three years for metal roofs in Holden Beach, and after any major storm. Salt air and wind take a toll on fasteners and sealants, and catching small issues early prevents leaks. We offer free inspections and can set up a maintenance plan to keep your roof in good shape.

Nearby service areas

📍 Wilmington 28403📍 Wrightsville Beach 28480📍 Carolina Beach 28428📍 Kure Beach 28449
Why choose us?

Trusted professionals in Wilmington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wilmington

All your work handled by qualified professionals in Wilmington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Wilmington

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Michelle B.
⭐⭐⭐⭐⭐
MB
Michelle B.
Navassa

“We needed a metal roof for our new equipment barn out on the rural side of the county and these guys knocked it out fast. The crew of four had the whole thing dried in before the afternoon storms rolled through, which honestly impressed me. No leaks, no loose panels, and they cleaned up every last screw off the ground.”

Commercial & Agricultural Metal Roofing
Jennifer M.
⭐⭐⭐⭐
JM
Jennifer M.
Southport

“We were worried we'd have to tear everything down on our old Victorian porch, but they did a metal-over-shingles retrofit instead and saved us a ton of hassle. It looks sharp and the flashing around the porch line is sealed up tight. Took a couple days longer than quoted, but the price held and the work is solid.”

Metal Roof Over Shingles (Retrofit)
James P.
⭐⭐⭐⭐⭐
JP
James P.
Leland

“Our old farm shed had a rusted-out red roof that was leaking on everything. Wilmington Metal Roofing replaced the whole thing with red corrugated panels and it looks brand new. They even matched the color so it blends with the rest of the property. Couldn't be happier.”

Corrugated & Ribbed Panel Roofing
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Wilmington

“Went with standing seam for our new build and the finish came out beautiful, the hidden fasteners make such a clean look. The crew walked me through the panel layout before they started and finished on the timeline they gave us. Relieved to have a roof I won't have to think about for decades.”

Standing Seam Metal Roofing
David L.
⭐⭐⭐⭐⭐
DL
David L.
Carolina Beach

“Had a leak creeping in around the chimney on our red metal roof and they tracked it down quick. Turns out it was the flashing, not the panels, and they resealed it and did a full inspection while they were up there. No more drips and the price was fair.”

Metal Roof Repair
Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Wrightsville Beach

“Just had our colonial done and I keep catching myself staring at it from the street. The crew was respectful, showed up when they said they would, and the cleanup was spotless, not a single stray screw in the yard. Honestly surprised how smooth the whole thing went.”

Metal Roof Installation
Emily C.
⭐⭐⭐⭐
EC
Emily C.
Belville

“Chose metal shingle roofing for our house and it's a huge upgrade from the old asphalt. The crew of three finished in about four days including all the trim work. They did leave a bit of debris in the flower bed, but they came back the next morning to finish the cleanup without me even asking.”

Metal Shingle Roofing
Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
Kure Beach

“They installed new gutters to go with our metal roof and matched the color perfectly. The difference is night and day, no more water sheeting off the edge and flooding the walkway. Grateful for how thorough they were with the downspout placement.”

Gutters for Metal Roofs
Free Quote

Get Your Free Quote

Metal Roofing in Wilmington · Response within 24h · No commitment · ☎ (910) 218-9134

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wilmington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm