Serving the Wilmington area  ·  (910) 218-9134  ·  Open Mon-Sun 7am-7pm
📞 (910) 218-9134 Free Quote

Metal Roofing in Oak Island, NC (28465) · Local Professionals

Wilmington Metal Roofing · Fast response in Oak Island and the Wilmington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Oak Island is a barrier island town where the Atlantic is never far from your roof, and the salt air hits every shingle, panel, and fastener on the island. The housing stock here tells the story: raised beach cottages on pilings, classic bungalows from the 1950s and 60s, and newer two-story homes on tight lots from the Yaupon Beach area down to Caswell Beach. We know the wind that comes off the water at The Point and the way nor'easters push rain sideways into every seam.

Homeowners in Oak Island (28465) call Wilmington Metal Roofing because we understand coastal roofing. We have worked on homes near the Oak Island Lighthouse, along East Beach Drive, and in the quiet neighborhoods off Oak Island Drive. When your roof needs to stand up to salt, wind, and sun, we are the local team that knows how to do it right.

Metal Roofing in Oak Island (28465)

Roofing on Oak Island is different from the mainland. The island is low and flat, built on sand and tidal marsh, and the salt air is relentless. Cheap fasteners rust through in a few years, and wind-driven rain finds every gap. Many homes are raised on pilings, which means roof access can be tricky and staging requires care. Lots are often narrow, and the proximity to the ocean means wind uplift is a real concern. We see a lot of stone-coated steel and standing seam roofs here because they handle the coastal conditions better than asphalt shingles. We also deal with sand accumulation in valleys and behind chimneys, and the occasional fallen limb from the live oaks and pines that grow between houses.

Our team has been serving Oak Island and the greater Wilmington area for years. We know the local building department, the inspection process, and the specific challenges that come with roofing on a barrier island. Whether you are replacing a roof on a 1960s cottage or installing a new metal roof on a modern beach house, we have the experience to get it done right.

Our services in Oak Island

How a Job Works in Oak Island

Step 1: You call us at (910) 218-9134 or request a free estimate online. We schedule a time to come out and inspect your roof. We will look at the current condition, check for leaks, and talk with you about what you want. We provide a written estimate with clear pricing and options.

Step 2: Once you approve, we pull the necessary permits from the local building department. On Oak Island, permit timing can vary, and we stay on top of it. For homes in tight neighborhoods or with HOA rules, we coordinate access and make sure any design requirements are met. Our crew arrives on time, protects your landscaping, and works efficiently. We use corrosion-resistant fasteners and materials suited for the salt air.

Step 3: After the work is done, we clean up thoroughly. We haul away all old materials and debris, and we do a final walkthrough with you to make sure you are satisfied. We do not leave until your property is clean and your roof is ready for the next storm season.

Pricing for metal roofing in Oak Island depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical beach cottage, metal roof installation starts around $8 per square foot, standing seam starts at $10 per square foot, and metal roof replacement starts at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs, such as fixing a leak or replacing fasteners, start at $450. We also offer free estimates for storm and wind damage inspections. Call us at (910) 218-9134 to get a precise quote for your home.

My Oak Island cottage is raised on pilings. Does that affect how you install a metal roof?
Yes, it can. Raised homes often have less accessible roof edges and require careful staging. We use ladders and scaffolding suited for piling foundations, and we make sure all fasteners are secured properly to handle wind uplift. We also check the condition of the roof deck, which can be affected by moisture in coastal homes.
How quickly can you respond to storm damage in Oak Island?
We prioritize storm and wind damage calls. After a named storm, we aim to inspect your roof as soon as it is safe to do so. Call us at (910) 218-9134 to report damage and schedule a free inspection. We can often provide temporary repairs to prevent further water intrusion.
What is the typical cost for a metal roof on a 1,500 square foot home in Oak Island?
For a home that size, a basic corrugated or ribbed panel roof might start around $8,000 to $10,000, while standing seam could range from $15,000 to $20,000. Factors like roof pitch, number of penetrations, and material choice affect the final price. We provide a detailed estimate after inspecting your roof.
Do I need a permit to replace my roof in Oak Island?
Yes, the Town of Oak Island requires permits for roof replacements. The exact requirements and fees are set by the local building department. We handle the permitting process for you and ensure all work meets current building codes. We also coordinate inspections as needed.
My neighbor's tree hangs over my roof. Can I trim it, and does my HOA need to approve my new roof color?
You generally have the right to trim branches that overhang your property line, but it is best to check with your neighbor first. For HOA approval, many Oak Island neighborhoods have design guidelines that may restrict roof color and material. We can provide product samples and documentation to help with your HOA submission.
Are you insured for work on my Oak Island property?
Yes, we are fully insured, carrying both general liability and workers' compensation insurance. This protects you and your property in case of any accidents during the project.
What maintenance does a metal roof need in Oak Island's salt air?
We recommend an annual inspection to check for loose fasteners, debris buildup, and any signs of corrosion. After major storms, a quick check is wise. Keeping gutters clean and trimming overhanging branches helps extend the life of your roof. We offer maintenance plans and inspections to keep your roof in top shape.
Why choose us?

Trusted professionals in Wilmington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wilmington

All your work handled by qualified professionals in Wilmington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Wilmington

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wilmington · Response within 24h · No commitment · ☎ (910) 218-9134

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wilmington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm