Serving the Wilmington area  ·  (910) 218-9134  ·  Open Mon-Sun 7am-7pm
📞 (910) 218-9134 Free Quote

Metal Roofing in Shallotte, NC (28470) · Local Professionals

Wilmington Metal Roofing · Fast response in Shallotte and the Wilmington area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+349Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Shallotte is a small town where the old and the new sit close together, from the brick ranches and cinder-block shops along Main Street to the newer subdivisions and raised cottages spreading out toward Ocean Isle and Sunset Beach.

Homeowners here deal with salt air, hurricane-season wind, and long humid summers that wear on roofs faster than most people expect. That is why they call Wilmington Metal Roofing. We know the housing stock in ZIP 28470, we know what the coastal weather does to fasteners and flashing, and we show up ready to work.

Metal Roofing in Shallotte (28470)

Shallotte sits on flat, sandy ground near the tidal creeks and marsh that feed the Shallotte River, and that shapes how we approach every roof. Older homes near the town center often have low-pitched shingle roofs that are prime candidates for a metal retrofit, while the newer construction out toward Ocean Isle and Sunset Beach tends to be elevated or two-story with tighter lots and stricter wind-uplift requirements. We deal with sandy soil that can make ladder footing tricky, tight driveways where we have to stage materials carefully, and the constant salt air that eats through cheap fasteners and low-grade panels. Whether it is a metal roof replacement on a 1970s brick ranch or a standing seam install on a new coastal cottage, we match the panel, the fasteners, and the flashing to the conditions here.

Our team has worked across Brunswick County and the greater Wilmington area long enough to know which panel profiles hold up to nor'easters and which ones rattle loose after a few storm seasons. We also understand the local permitting rhythm and what inspectors in this part of the state expect to see.

Our services in Shallotte

How a Job Works in Shallotte

Step 1: You call us at (910) 218-9134 or send a request, and we schedule a free on-site assessment. We walk the roof, check the decking and flashing, look at how the panels or shingles are fastened, and talk through what you are seeing inside the house. You get a written estimate with options, not a high-pressure sales pitch.

Step 2: Once you approve, we pull the roofing permit through the local building department and coordinate any HOA design review if your subdivision requires it. On install day we protect your landscaping, stage materials where they will not block the driveway, and keep the site organized. For replacements we tear off the old roof, inspect and repair the decking, then install the new metal system with fasteners rated for coastal conditions.

Step 3: We clean up every day and do a final magnet sweep for nails and screws. Before we leave, we walk the finished roof with you, show you the flashing details and fasteners, and make sure you know how to reach us if anything comes up.

Pricing in Shallotte depends on the size and pitch of your roof, how many layers you are removing, access around the house, and whether there is any decking or framing repair needed. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs from about $10 per square foot, and a full replacement starts near $9 per square foot. If you are retrofitting over existing shingles, that starts around $7 per square foot, though local code limits how many layers you can leave in place. Repairs and leak calls start at $450, screw replacement and re-fastening starts at $750, and flashing or chimney work starts at $600. We give free estimates so you get real numbers for your property, not a phone guess. Call (910) 218-9134 to set one up.

My house is near the Shallotte River and the salt air has eaten through the fasteners on my existing metal roof. Can you replace just the screws or do I need a whole new roof?
It depends on the condition of the panels and the decking. If the panels are still sound and the washers are failing, screw replacement and re-fastening can buy you years, and that service starts at $750. If the panels are thin or the decking has soft spots from long-term moisture, a replacement makes more sense. We inspect the whole assembly and give you both options with pricing.
A storm knocked limbs onto my roof and I have water coming in. How fast can you get to Shallotte for an emergency repair?
We prioritize active leaks and storm damage. Call (910) 218-9134 and describe what you are seeing. We will schedule the soonest available inspection, often same day or next day depending on storm volume, and we can tarp or make temporary repairs to stop the water while we plan the permanent fix.
What does a typical metal roof replacement cost for a 1,800 square foot ranch house in Shallotte?
Most ranches that size fall in the range of $9 to $14 per square foot for a replacement, so roughly $16,000 to $25,000 depending on pitch, access, decking condition, and panel choice. A simple corrugated or ribbed panel roof runs less, while standing seam or stone-coated steel runs more. We give a free on-site estimate so you get a firm number.
Do I need a permit to replace my roof in Shallotte, and who handles that?
Yes, a roofing permit is commonly required for a full replacement or re-roof, and the threshold and inspection requirements are set by the local building department. We pull the permit for you and coordinate the inspections. Rules can vary, so we always confirm the current requirements with the town before work starts.
My HOA has design rules about roof color and panel style. Can you help with that approval process?
We can. Many subdivisions around Shallotte have architectural review requirements, and we provide product specs, color samples, and panel profiles you can submit to your HOA. We will coordinate timing so the install does not start before approval is in hand. If there is a property-line question with a neighbor, we also confirm setbacks and where the roof drains before we finalize the layout.
Are you fully insured for work at my Shallotte property?
Yes. We carry general liability insurance and workers' compensation coverage for our crew.
What maintenance should I do on a metal roof in Shallotte to make it last through hurricane season?
Keep the roof and gutters clear of pine needles and leaf debris, especially if you have longleaf or loblolly pines nearby. Check the fasteners and washers once a year for corrosion or backing out, and look at the flashing around chimneys and skylights after any major storm. A free inspection before storm season is the best way to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Wilmington

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Wilmington

All your work handled by qualified professionals in Wilmington

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

349+ Verified Client Reviews in Wilmington

⭐⭐⭐⭐⭐ 4.9/5 · 349 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Wilmington · Response within 24h · No commitment · ☎ (910) 218-9134

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Wilmington ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm